|
is a corrosion preventive fluid with good film building properties for open surfaces as well as for cavities i.e. chassis box sections. It is capable of good penetration into crevices and joints, preventing further corrosion even on damp or dirty surfaces. Leaves a brown, waxy water repellent protective film. It is also recommended that a thin coating (30-50 microns) be applied to the underbody, prior to applying DINITROL 4941, because this product has the ability to creep into the small nooks and crannies that the thicker product is not able to.
Available in 400ml spray can and 1 litre.
CLICK HERE for Technical and Health & Safety Data Sheets
|
DINITROL 4941
is a black external under body corrosion preventive fluid which provides long term resistance against corrosion and abrasion, even under severe conditions. Provides a tough elastic waxy protective coating. The film is resistant to repair and paint oven temperatures.
Available in 400ml spray can and 1 litre.
CLICK HERE for Technical and Health & Safety Data Sheets
|
DINITROL 445
is a black, permanently elastic anti-stone chip product which also protects against corrosion. It has a sound deadening effect and can be overpainted. It does not contain aggressive solvents such as chlorinated hydrocarbons and will not attack PVC coatings. This product should be used in areas where there is high abrasion like wheel arches.
Available in 500ml spray can and 1 litre.
CLICK HERE for Technical and Health & Safety Data Sheets
|
DINITROL 4010
is a long term engine protection product with heat resistance up to 200 centigrade. The product leaves a firm transparent film with short drying time and good adhesion and flexibility on all metal surfaces, rubber and plastic parts. It is resistant to alkali and acidic solutions. Ideal for using under bonnet on hose clips and unpainted aluminium which can corrode leaving a white powder. Suitable for spraying on all areas but avoid exhaust manifolds and down pipes. Any overspray will soon burn off.
Available in 500ml spray can only.
CLICK HERE for Technical and Health & Safety Data Sheets
|
|
Rust converter is a milky emulsion which converts hard rust into a stable organic iron complex. The product is free from solvent, acid and lead. Do not remove all traces of rust. It is self-priming and changes to a black semi-gloss finish.
Available in 400ml spray can and 1 litre plastic bottle.
CLICK HERE for Technical and Health & Safety Data Sheets
Clean all equipment and overspray with a solvent based cleaner
|
DINE17005 DINITROL SPRAYGUN - SCHUTZ STYLE
This screws directly onto the 1 litre cans and comes with standard nozzle and a 400mm x 10mm hose for applying cavity wax. Requires 6 Bar operating pressure & 4 cfm.
|
DINPLUGBL50
Black plugs used for blanking holes drilled to apply cavity wax. These are tapered for easy insertion.
CUSTOMERS INCLUDE;
Aston Martin Lagonda, Maranello, Ferrari, Maserati
|
How much product do I need? Cavity UnderBody
| Small Car |
eg: Mini, Citroen 2CV |
2 litres |
3 litres |
| Medium Car |
eg: Ford Escort, Astra |
3 litres |
4 litres |
| Large Car |
eg: BMW 5, Merc E class |
4 litres |
6 litres |
| Landrover 110 |
Long wheel base |
4 litres |
6 litres |
Below is a typical spray diagram for a car. We have a limited number of diagrams available for certain vehicles.
Spray Diagram - Jaguar E-Type


Click below to view an application guide for the LTI taxi. This will give you an indication of where and how to apply the product.
LTI - DINITROL Retreatment Manual
Would you like to have it applied professionally?
Go To Our Treatment Centres Page.